High Standerd Full Automatic 4 Color Flexo Printing Machine For Printing On Packaging Materials
Features
1.Water-based ink printing, green enviromental protection, no pollution, in line with intermational environmental protection printing standard.
2.From 1 to 15 colors printing color group, can be arbitary combination.
3.Printing unit using high-precision.
4.Flexo printing method: flexo printing or combination of flexo and gravure.
5."Upper feeder" structure reduces the version of the plate roller and network roller, thus reduce the focus of the whole printing group, the equipment run more smoothly, completely overcome the surface dust, fiying ink ,the ink on the printing quality of pollution ;
6.Totally enclosed type doctor blade can supply quantitative ink, overcome the flying ink, ink leakage phenomenon, save in, can accurate control for the ink amount, makes the ink stability, further improve the printing quality.
7.High precision tension sensor closed loop design of constant tension, ensure accurate printing tension stability.
8.Computer automatic color register control, overlay accuracy and stability,
9.High-performance correction system, ensure base material is running the end face of the linear stability and winding finished product uniformity.
10.Air drying unit takes high energy efficient, the heat conduction oill or steam heating mode is also choosed.
11.HD color still images, easy printing quality was observed.
12.Distributed console, easy to operate.
13.Save paper and supplies, reduce labor and cost.
Scope of applications
Printing and packing industry high speed presswork of roll paper and plastic films,such as food package, cigareete package,
madecines,daily necessities,industrial,.carton pre-printing and so forth.
Technical Data
| Model |
XYRA-1000 |
| Printing material |
paper 65-400g/cm |
| Printing ink |
water-based ink |
| The maximum width of printing material |
1000mm |
| The maximum width of the printing plate roller |
1050mm |
| The maximum printing circumference |
1200mm |
| Maximum mechanical speed |
170m/min |
| The maximum printing speed |
150m/min |
| Plate registration accuracy |
±0.1mm |
| The maximum diameter of rewinding and unwinding |
Φ1200mm |
| The diameter of the air shaft for retracting and unwinding |
Φ74mm |
| Rewinding and unwinding paper tube diameter |
Φ96mm |
| Main drive motor power |
11kw |
| Electric heating power of oven |
86kw |
| Total power |
137kw |
| Machine cavity width |
1400mm |
| The weight of the machine |
about 18 tons |
| Machine color |
milky white |
| Machine dimensions |
11600 (L) Χ3800 (W) Χ 2800(H) mm |
Main Technical Parameters
| Model |
Max. Web width |
Max. printing width |
Max. repeat |
Max. Rewinder diameter |
Max. machine speed |
| XYRA 850 |
870 |
850 |
1200 |
1100 |
150 |
| XYRA 1000 |
1020 |
1000 |
1200 |
1100 |
150 |
| XYRA 1100 |
1120 |
1100 |
1200 |
1100 |
150 |
| XYRA 1270 |
1300 |
1270 |
1200 |
1100 |
150 |
| XYRA 1350 |
1370 |
1350 |
1200 |
1100 |
150 |
| XYRA 1450 |
1470 |
1450 |
1200 |
1100 |
150 |
| XYRA 1600 |
1620 |
1600 |
1200 |
1100 |
150 |
Main components
1. Unwinding unit 1 set
2. Unwinding and pulling in unit 1 set
3. Printing unit 4 groups
4. 1 set of winding traction unit
5. Winding unit 1 set
6. Computer color registration system and still picture 1 set
Unwinding unit
1. Single station unloading rack
2. Loading and unloading hydraulic lifting
3. The discharge shaft is driven by the motor alone
4. Low friction cylinder and roller tension detection system
5. Closed-loop automatic control of unwinding tension
6. Automatic correction device
7. Parameters and configuration:
1) Unwinding motor 11kw 1 set Shanghai Danma
2) Unwinding motor control 11kw 1 set Yaskawa, Japan
3) Low friction cylinder for swing roller 1pc Fujikura Japan
4) Precision pressure regulating valve 1 Japan Fujikura
5) Roll lateral adjustment ±20mm
6) Main bearing NSK
7) Main low-voltage electrical appliances SE, Franch, etc.
Unwinding and pulling in unit
1. Double-roller, rigid-flexible combination
2. Traction roller cylinder clutch
3. The traction roller is driven by the motor alone
4. Low friction cylinder and roller tension detection system
5. Automatic tension control
6. Parameters and configuration:
7.Traction motor 4kw 1 set Shanghai Danma
8.Traction motor control 4kw 1 set Yaskawa, Japan
9.Low friction cylinder for swing roller 1pc Fujikura Japan
10.Precision pressure regulating valve 1 Japan Fujikura
11.Tension control range 3---100kg
12.Main bearing NSK
13.Main low-voltage electrical appliances SE, Franch, etc.
Printing unit
1. The main motor transmits power to each color through the main drive shaft and gear, and the plate roller rotates
2. Separate pulling and pulling mechanism for each color
3. Mounting method Shaftless steam-top type
4. Manual horizontal adjustment of the plate roller
5. The advance and retreat of the plate roller is controlled by the servo motor
6. The closed scraper and ceramic anilox roller supply ink accurately, and the advance and retreat are controlled by servo motor
7. Ink Circulation Mode Vapor Separator Pump
8. The oven is heated by an electric heating tube, and the temperature is automatically controlled
9. Each color oven is discharged through the air duct by the centrifugal fan
10. Parameters and configuration:
1) The electric heating power of each color oven is 21.6kw
2) Maximum oven temperature 80º
3) Plate roll lateral adjustment ±10mm
4) Main drive motor 11kw 1 set Shanghai Danma
5) Main drive motor control 11kw 1 set Yaskawa, Japan
6) HMI Taiwan Wellun
7) PLC Siemens
8) Main bearing NSK
9) Main low-voltage electrical appliances SE, Franch, etc.
Vertical computer color registration system
Vertical computer color registration system 2000FV Kesai
with machine accessories
1. Rack leveling pad 1 set
2. Double-ended wrench 19×22 1
3. Double-ended wrench 27×30 1
4. Allen wrench 1 set
5. 1 slotted screwdriver
6. 1 cross-shaped screwdriver
7. Air separation pump 1 set
Others:
Since this model is one of the high-tech products, we reserve the right to change certain structures and parameters according to design requirements, in order to provide you with better equipment.
01. How to get in touch with us?
Call us directly
Direct to the company: National Road 104, Songqiao Industrial Zone, Wanquan Town, Pingyang County, Zhejiang Province, China
02. How to answer technical guidance?
For some customers who need non-standard equipment, we will communicate with the company's relevant technical personnel according to the customer's specific requirements, taking into account the technical feasibility and production costs, and give customers solutions.
03. How to recommend products?
We have nearly 14 products in four series. We can also provide non-standard equipment production and new product development services according to customer requirements. According to the customer's requirements to be produced, the purpose of the product to be purchased, the environment, the purchase volume and other related conditions, we will recommend several cost-effective products for the customer to choose.
04. How to make a quotation?
Based on our company's research and development costs, production costs and customer purchases, we conduct calculations to determine the price of the product.
Problems in sale
01. About payment
After signing the contract, 30% of the total payment will be paid in advance, and the factory will accept the payment and pay the full amount of the machine for delivery.
02. About delivery time
About 45 working days after receiving the deposit (non-standard machine), the factory will re-decide whether to change the delivery date when the order is confirmed. The standard machine is generally within 30 working days after receiving the deposit
03. Order tracking
After the customer places an order, our company will send professional personnel to track the order and regularly report the production progress to the customer. Customers can check the order status on the official website (delivery query).
04. Product testing
During the production process, our company will adopt strict inspection process to ensure product quality. Through internal inspection, we ensure that the components produced by our company meet the technical requirements; through external inspection, we ensure that the components produced by our company are not subject to quality problems; and then pass the whole machine inspection to ensure that the mechanical equipment meets the technical production requirements .
05. Product packaging
Before the product is shipped, it will be packed in a strict vacuum plus bottom tray (wooden tray or steel tray)
06. Product Transportation
Products are generally shipped from Ningbo Port, China to the destination port by sea.
After sales question
01. Shelf life/warranty period of the product
The product warranty period is generally one year, and our company provides lifetime maintenance services. If the machine has quality problems, our company will help the customer to solve it through the following ways: a. Send spare parts to the customer. b. Remotely assist customers in maintenance. c. Notify our agent company to send personnel to the customer's factory for maintenance. d. Our company directly dispatches relevant personnel to the customer's factory for maintenance.
02. About transportation damage
In the process of product transportation, if product damage occurs, it is determined that our product packaging and reinforcement work is not in place, and our company will bear the corresponding losses.
03. About machine maintenance
We will contact customers on a regular basis on how to maintain and maintain the machine. For domestic customers, we will have a master to provide on-site service.
04. Problems during use
If there is any problem in the process of using the product, the customer can directly call or send an email to our after-sales department (24-hour hotline). The personnel of our department will respond immediately and make a decision on the response measures within 24 hours.
Audited Supplier 
Features
){kind=link}